Electronics Gear- Electronics,Computer Sales and Service: Stewart Audio CVA-7400 2-Channel Amplifier - 200W x 2 at 70.7V, Professional Audio, cva-7400

Stewart Audio CVA-7400 2-Channel Amplifier - 200W x 2 at 70.7V

The CVA-7400 Contractor Series Power Amplifier delivers more than 200 watts per channel in stereo mode. Stewart Audio's unique power shift correction feature allows the amplifier to produce crystal clear uncolored sound. This remarkable performance comes in a package weighing only 10 pounds while occupying just one standard rack space. Thermal concerns are minimized in the CVA-7400 by innovative circuitry and extraordinary efficiency, making installation simpler than ever before.

The design of the CVA-7400 is exceedingly conservative with regard to current capabilities. This ensures that the amplifier's output devices remain within their safe operating area, even under extreme conditions. As a result, the CVA-7400 runs low impedance loads safely while retaining the high impact dynamics for which they were designed.

Stewart Audio CVA-7400 Features:

Two Channel Amplifier, optimized to drive a 70.7V line
Convection Cooled
Selectable 12dB Per Octave High Pass Filter for each channel (32Hz, 68Hz, or 150Hz)
7 Stage Circuit guard Protection
Stewart's VIF Limiting
Front Panel Level Adjust with Security Plugs
Ultra Efficient Switch Mode Power Supply
Made in the USA
UL Certified

Stewart Audio CVA-7400 Applications:

Full Frequency 70.7V line Applications
Sound Masking
Music and Paging Systems
Engineered Sound
High Quality Distributed Sound Systems
Fixed Installations
Amplifier in Listening Environment
Remote Turn On/Off Applications

Stewart Audio CVA-7400 Specifications:

70.7 Output Power: 200W x 2
Frequency Response (+/- 0.3dB, 1W): 35Hz - 20kHz
Full Power Bandwidth: 35Hz - 20kHz
Signal to Noise Ratio: >100dB
THD+N: <.1%
Damping Factor: >200
Slew Rate: 30V/ms
Input Sensitivity: 1V (0 dBV)
Standard Voltage Gain: 40x (32dB)
Input Impedance: 20k Ohms
Idle Current Draw, 1/8 Power Draw: 0.31,1.1 Amps
Class: H
Input Connectors: XLR and Barrier
Output Connectors: 5-way Binding Post
Power Supply: High-speed Switching
Remote Turn On: 5VDC
Cooling: Convection-Cooled (No fans)
Controls: Power, Gain (Screwdriver adjust)
LED Indicators: Signal Present, Power & Clip
Construction: Steel & Aluminum
Dimensions (H,W,D): 1.75"H x 19"W x 15.3"D
Weight: 10lbs
Warrant: 3 year

		Home \| Contact \| Privacy Policy \| Returns \| Terms of Use \| Warranty
		Copyright © 1994-2024 Designed and Hosted by Electronics Gear All Rights Reserved