High quality, commercial grade microphone and small-signal cable that's perfect for building your own! Also for making high quality low loise RCA patch cables. Features two 22 ga. center conductors (as opposed to 24 ga. found in many competitors' cables) for lower resistance and maximum signal transfer. Super durable, yet flexible midnight blue PVC outer jacket. Available in custom lengths, or buy it on spools and save. Specifications: * Conductors: 2 x 22 ga. (65 x 40 ga.) * Insulation colors: Black and white * Shield: 92% coverage bare copper braid * Jacket: Midnight blue PVC, 6.4 mm (.252") O.D. * 100% satisfaction guaranteed * Made in the U.S.A.

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 20" H x (8" Front, 4.5" Back) W x 14" D. Note: Cabinet dimensions do not include grill

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 22" H x (9" Front, 4.5" Back) W x 14.8" D. Note: Cabinet dimensions do not include grill

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 22" H x (9" Front, 4.5" Back) W x 14.8" D. Note: Cabinet dimensions do not include grill

If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 22" H x (9" Front, 4.5" Back) W x 14.8" D. Note: Cabinet dimensions do not include grill

The mounting dimension is shallow, but the response is deep! Dayton Audio's NS Series offers new possibilities for installing low distortion, high output sub drivers. As little as 2-1/2" in depth (NS210-44 8"), these heavy duty neodymium transducers are perfect for mounting in walls, floors, and even ceilings, as well as stealthy mobile audio applications. The performance characteristics alone will convince you to use NS Series subs—even when space is not an issue! Specifications: *Power handling: 200 watts RMS/400 watts max *VCdia: 2" *Le: 0.85 mH *Impedance: 2 ohms *Re: 1.82 ohms *Frequency range: 35-500 Hz *Fs: 38 Hz *SPL: 91 dB 2.83V/1m *Vas: 0.51 cu. ft. *Qms: 5.74 *Qes: 0.39 *Qts: 0.37 *Xmax: 7 mm *Dimensions: A: 8-1/4", B: 7-3/8", C: 2-1/2". Note: All specifications are with voice coils connected in parallel.

The mounting dimension is shallow, but the response is deep! Dayton Audio's NS Series offers new possibilities for installing low distortion, high output sub drivers. As little as 2-1/2" in depth (NS210-44 8"), these heavy duty neodymium transducers are perfect for mounting in walls, floors, and even ceilings, as well as stealthy mobile audio applications. The performance characteristics alone will convince you to use NS Series subs—even when space is not an issue! Specifications: *Power handling: 250 watts RMS/500 watts max *VCdia: 2" *Le: 0.91 mH *Impedance: 2 ohms *Re: 1.85 ohms *Frequency range: 30-300 Hz *Fs: 32 Hz *SPL: 93 dB 2.83V/1m *Vas: 1.41 cu. ft. *Qms: 4.58 *Qes: 0.42 *Qts: 0.39 *Xmax: 7 mm *Dimensions: A: 10-1/4", B: 9-3/8", C: 3-3/16". Note: All specifications are with voice coils connected in parallel.