Buy Now! Only $39.99!

Buy Now! Only $19.99!

• Scare off burglars, or just know someone's coming.
• Chime plugs in anywhere - always have it near by.

Buy Now! Only $24.99!

Buy Now! Only $64.99!

Buy Now! Only $19.99!

Buy Now! Only $24.99!

Slimline Wireless Wall Switch (White)
Micro thin! Only 7 millimeters! Completely indistinguishable from an ordinary wall plate. Single push-button programmability. 3 on/off buttons PLUS 4th button dimmer control. Adheres to any surface. Mount it anywhere to have the perfect wall switch right where you've always wanted -- no wiring!

Buy Now! Only $19.99!

• Remotely control a light fixture - just screw it in.
• Easy to install because it's wireless!

Buy Now! Only $19.99!

The X10 Sundowner Controller lets you remotely control lights and appliances from anywhere in
your home. It also turns lights on automatically at dusk. You can keep it by the bedside and turn
off the TV without getting out of bed. You can turn off your child’s radio or night light from your
bedroom. You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with
the push of a button if you hear a noise at night. You can even turn off everything in the system
with one button to save energy. How many times have you gone to bed and left a downstairs light
on because you didn’t want to get out of bed to turn it off? Now you don’t have to.
Caution: Be very careful when you use your X10 Sundowner Controller with any kind of
appliance. If you accidentally turn on an empty coffee pot for example, you could burn out the
element and even create a fire hazard. Switching on an unattended heater could also cause a
serious fire hazard.
The X10 Sundowner Controller activates lights and appliances throughout your home from any
convenient location. The Sundowner Controller transmits signals to the Modules over your
existing house wiring. You plug lamps into Lamp Modules, plug appliances into Appliance
Modules and replace wall light switches with Wall Switch Modules. You can then control virtually
everything electrical in your home. You can also dim and brighten lamps, and have them come on
automatically at dusk.
How it works
The Sundowner Controller tells the Modules what to do. Command signals are sent over your existing
house wiring to the Module or Modules of your choice. The Modules respond to the command
signals. The Lamp Module turns on and off, and dims and brightens any incandescent lamp up to 300
watts. The Appliances Module turns on and off appliances such as a TV, (not “instant on” TVs), a
window fan, or a stereo. It can also be used for a lamp - but cannot dim it. The Wall Switch Module
turns on and off, and dims and brightens an incandescent light up to 500 watts, which is normally
operated by a wall switch.
To turn ON a light or appliance
Press and release the TOP of one of the 4 number keys corresponding to the Unit Code set on the
Module to be controlled.
To turn all lights on (i.e. all lamps connected to Lamp Modules or Wall Switch Modules set to the
same House Code) press the TOP of the All Lights On/All Units Off key. This key does not affect
Appliance Modules.
To turn OFF a light or appliance
Press and release the BOTTOM of one of the 4 number keys corresponding to the Unit Code set on
the Module to be controlled.
To turn off all modules, including Appliance Modules, press the bottom of the All Lights On/All
Units Off key.
To Dim or Brighten lights
Press and release the TOP of the number key for the Lamp Module or Wall Switch Module you want
to Dim or Brighten (you can’t Dim or Brighten Appliance Modules). Then press the TOP of the Dim/
Bright key to Brighten or the BOTTOM of the Dim/Bright key to Dim the light. Hold the key pressed
until the desired brightness level is reached.
The Finder Label is a convenient place to indicate the locations of lights and appliances controller by
your system. There is one box for each unit key.
Automatic Light Control
Test the Dusk-to-Dawn operation by covering up the front of the Sundowner with your hand. The
lights you selected (with the slide switches underneath the Sundowner Controller) should come on.
Remove your hand and the lights should go off again. Adjust the sensitivity setting for the lights to
come on when you want them to - a little trial and error may be needed.
Using the Sundowner Controller
4. Adjust the slide switches on the base of the Sundowner Controller to choose which lights you
want to come on at dusk and go off at dawn. Set the sensitivity to Max.
Having 16 choices for the Housecode lets you set up several independent systems in one home
without interaction among them. Also, you can avoid interference with, or from a neighbor’s system
by choosing a different Housecode letter.
Setting up the Sundowner Controller
1. To install your Sundowner Controller, simply plug the power cord into any functioning wall
outlet. Position the controller where the light sensor on the front of the controller can “see”
daylight, e.g. near a window in a room which is usually unlit at dusk.
2. Set the slide switch on the top of the Sundowner Controller for the Modules you want it to
control (1 thru 4 or 5 thru 8).
3. Using a small screwdriver, choose one the 16 letters on the Sundowner Controller’s Housecode
dial. All X10 Modules have a similar red Housecode dial. Set the Sundowner Controller and all
the Modules to be controlled by it to the same Housecode letter.

Buy Now! Only $19.99!

Touch Tone Controller Console

Buy Now! Only $39.99!

The learning function ensures that the remote will work with any audio/video product, no matter how obscure. It even allows operation of IR controlled air conditioning and drapery controls, for example.

Teaching the remote a new set of codes is performed by placing the two remotes so that they face each other and pressing the key sequence to initiate programming. Each key on the original remote is then pressed in sequence followed by its corresponding key on the Universal 5-in-1 Learning Remote. 

Buy Now! Only $49.99!

Buy Now! Only $18.99!

Features: Rated at 500W (incandescent). Dimmable through X10 controllers.

Buy Now! Only $12.99!

Wall Switch Module (3-way)

Buy Now! Only $15.99!