The Dayton Audio Series II heavy duty woofers feature natural sounding paper cones that are chemically treated for extra durability and long life. The combination of a large magnet structure, vented pole piece, bumped backplate, and large voice coil provides excellent power handling capability with high efficiency and very low distortion. Suspension system consists of a rubber surround and large flat spider for superior damping characteristics and outstanding transient response. Made in the U.S.A. Specifications: * Power handling: 275 watts RMS/380 watts max * Voice coil diameter: 2-1/2" * Le: 3.07 mH * Impedance: 8 ohms * Re: 6 ohms * Frequency response: 25-2,000 Hz * Magnet weight: 56 oz. * Fs: 30 Hz * SPL: 92 dB 1W/1m * Vas: 4.52 cu. ft. * Qms: 10.55 * Qes: .36 * Qts: .35 * Xmax: 8mm * Dimensions: Overall Diameter: 12", Cutout Diameter: 11", Mounting Depth: 6", Magnet Diameter: 6-1/8", Magnet Height: 1-7/8".

The new generation of Dayton Audio Heavy Duty woofers features natural sounding paper cones that are chemically treated for extra durability and long life. The combination of a heavy magnet structure, vented pole piece, bumped backplate, and large voice coil provides excellent power handling capability with high efficiency and very low distortion. Unique suspension system consists of a rubber surround and large flat spider for superior damping characteristics and outstanding transient response. Made in the U.S.A. Specifications: * Power handling: 300 watts RMS/425 watts max * Voice coil diameter: 2-1/2" * Le: 4.25 mH * Impedance: 8 ohms * Re: 5.8 ohms * Frequency response: 20-1,000 Hz * Magnet weight: 90 oz. * Fs: 19 Hz * SPL: 89.8 dB 1W/1m * Vas: 10.63 cu. ft. * Qms: 8.30 * Qes: 0.33 * Qts: 0.32 * Xmax: 7.9mm * Dimensions: Overall Diameter: 15-1/8", Cutout Diameter: 13-7/8", Mounting Depth: 6-9/16", Magnet Diameter: 7-5/8", Magnet Height: 1-7/8".

The Dayton Audio SUB-1000 10" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 10" woofer and up to 100 watts of house-shaking power.

The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

Specifications: • Power output: 100 watts RMS • Frequency response: 30-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Dimensions: 14-3/4" H x 14-3/16" W x 15-3/4" D.

Overview

Highlights

• Downward-firing flared port design for clean, powerful bass
• Selectable "Auto-on" mode
• Heavy duty long-throw 12" woofer
• Perfect for small home theaters or listening rooms
• Unobtrusive textured black vinyl finish

The Dayton Audio SUB-800 8" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 8" woofer and up to 80 watts of house-shaking power.

The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

Specifications: • Power output: 80 watts RMS • Frequency response: 40-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Dimensions: 12-3/4" H x 12-3/16" W x 14-3/8" D.

This attractive, high-quality subwoofer cabinet makes it simple to build your own 15 powered subwoofer. The black ash vinyl finish and recessed cloth grill provide a very clean yet professional look. Precision CNC-routed with a 13-7/8 diameter driver cutout (fits most 15 stamped-frame woofers) on the front, and a cutout for the Dayton SA240 subwoofer amplifier on the rear. Features cross-braced side panels, pre-mounted rubber feet, and even includes polyfiber-lined walls! Simply buy your favorite 15 driver, the SA240 amp, a few screws, and youll be rocking in no time! Specifications: Overall external dimensions: 18 W x 18 D x 19 H, Internal dimensions: 16-1/2 W x 16-1/2 D x 16-3/4 H, Internal volume: 2.5 cu. ft. Designed for optimum performance when used with the Dayton DCS380-4, QT385-4, or DVC385-88 15 subwoofer drivers. 

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 1.0 cu. ft.
    * External dimensions: 14" x 14" x 12-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 1.0 cu. ft.
    * External dimensions: 14" x 14" x 12-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 1.0 cu. ft.
    * External dimensions: 14" x 14" x 12-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 1.0 cu. ft.
    * External dimensions: 14" x 14" x 12-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 2.0 cu. ft.
    * External dimensions: 17" x 17" x 15-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinetspolished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofersyou will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately. * Net volume: 2.0 cu. ft. * External dimensions: 17" x 17" x 15-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 2.0 cu. ft.
    * External dimensions: 17" x 17" x 15-7/8"

All SWC cabinets use the Dayton Audio B-REX removable/replaceable baffle exchange system. The 1" thick MDF blank baffles are custom-cut by the user to fit a given driver and amplifier, and are then fastened securely (permanently or not) into the enclosure. These stout, CNC-cut boxes are constructed from 3/4" MDF side panels backed up by a 1" x 3" cross brace, resulting in a rigid, well-damped subwoofer cabinet. Finishes match the popular Dayton Audio speaker cabinets—polished gloss black lacquer, and lush natural cherry or maple hardwood. A new high-value textured black vinyl covering is available for projects that demand a more understated appearance while enjoying the benefit of greatly reduced cost. Note: These cabinets do not have cutouts for amplifiers or woofers—you will need to cut your own holes per your design. Each enclosure includes two black satin finish baffles (one each, front and back) with mounting hardware, a magnetically attached grill, and four rubber feet fastened by 6 mm barbed inserts. The barbed inserts are compatible with Dayton Audio cone spikes, available separately.

    * Net volume: 2.0 cu. ft.
    * External dimensions: 17" x 17" x 15-7/8"